23
GB
which increase air purification, help in the removal of dust and UV lamp.
The UV lamp effectively eliminates a large variety of common bacteria and viruses as well
it inhibits production, acts on the filters helping them to eliminate the dirt on them.
REPLACEMENT OF FILTER
1. Unplug form the power and 2. Remove the old filter 3. Clean the internal part
pull down the back cover by
handle and remove the filter cover
1. Install a new filter 2. Close the cover 3. Installation completed
Note: After installation, press the “filter reset” button to reset, and the filter data will be
restarted. When the countdown time is less than 60 hours or finished (initial value is 1500
hours), the screen sign flickers (standby lights go out); Once replaced, press the button for
43 seconds, the filter time will return to 1500 hours and the device will sound for 3 times.
(This button is invalid when the filter has not reached 1440 hours of use and the icon
doesn’t flicker)
HOW TO REPLACE BATTERIES
Remove the battery compartment from the bottom of the remote control by sliding the
compartment out. Remove the old battery and insert the new battery paying attention
to the polarity. Once inserted, place the battery compartment inside the remote control
and dispose of the exhausted battery in the appropriate containers or separate collection
centers.
