6
GB
TO INSTALL OR REMOVE THE BATTERIES
Remove the cover of the battery compartment located on the back of the mirror. Insert
4 AA batteries making sure to match the polarities as indicated on the device. Close
the cover.
Remove the batteries from the product if you will not use it for a long time.
It is recommended to always use 4 batteries of the same type and brand.
HOT TO USE
• Turn on the appliance using the ON / OFF button
• Turn on the LED lights by touching the Smart Touch button.
• Hold down the Smart Touch to set the brightness of the lights.
• Touch the Smart Touch button again to turn off the LED lights
• Turn off the mirror with the ON / OFF button
• Attention: The mirror can be rotated 180 °, see picture below.
CLEANING AND MAINTENANCE
• Always switch off the appliance and clean the product using a soft, damp cloth and
dry it thoroughly.
• Never immerse the product in water or other liquids.
• Do not expose the mirror to humidity to avoid compromising the internal circuit.
• Do not use abrasive solvents to clean the mirror as they could damage it.
• Do not expose the mirror to extremely hot or low temperatures, as this will shorten
the life of the device. destroy the batteries or distort certain plastic parts.
• Do not drop or bump the product.
• Do not attempt to repair and dismantle the product, contact the authorized after
sales service in case of malfunctions.
INN-802_manuale_230617 ese.indd 6
23/06/17 13:01
