INNOLIVING INN-517, User Manual

Page: 11 / 16

11
- Switch off the device before removing USB cable from USB port.
- Do not move the cooler when the tank is full of water.
- Use clean water or distilled water to fill in the water tank.
- The product works better in no smog and no polluted environments. The
presence of dust particles or dirt reduces product lifetime.
- It is suggested the use in dried environments, if the device is used in a damp
environment, pay attention to not let water be in contact with the device.
- In case of loss or outlet of water, switch off the device and disconnect from USB
port and let dry for at least 24 hours before use it again.
- Do not place the cooler under direct sunlight for prolonged time.
- Do not place the cooler next to fire or hot sources.
- In case the device is not used for a prolonged time, empty the tank, switch on the
device and set maximum speed for at least 4 hours. This procedure allows to dry
the filter and inside parts of the device.
- Always use the USB original cable supplied with the product.
- Do not touch the cable or the product connected to the USB port with damp
hands.
- Always disconnect the cooler from USB cable for cleaning and maintenance
operation, for filter replacement or to move the cooler.
- Do not turn upside down the device
- Do not submerge the cooler in water or other liquids.
- The product must be supplied only at a very low safety voltage corresponding to
the rating label on the product.
GB