20
• Make sure that the purifier is powered and the smartphone is connected to the WiFi
network:
press the Fan Speed button for 4 seconds, wait for the “beep” and then release it: this
means that the device is ready to pair with the smartphone.
• Open the “Tuya” APP and press “+” at the top right of the APP. Select the type of device
you want to connect, press “Small appliances” and press “Air purifier”, then enter the
password of the WiFi network to which the smartphone is connected and set the connection
to 2.4 GHz. Then press “Next” to connect to the purifier.
• When, after the pairing process, the message “Adding 1 device successful” is shown, it
means that the connection is complete and the device will be listed in the list of devices
associated with the APP.
3. Add Devices in AP Mode
If failed in Easy Mode, users could also add devices in AP Mode.
• Press the Fan Speed button for 4 seconds seconds until the purifier emits a “beep” and
the WiFi indicator light starts flashing quickly, then press the fan Speed button for another
4 seconds until another “beep” sounds “and the indicator light starts flashing slowly, this
means that the purifier is ready for configuration in AP mode.
• Press “+” at the top right of the APP. Select “Small Appliance”. Then enter the password of
the internet network (2.4GHZ) and select “AP Mode” at the top right, press “Connect now”
to enter the WLAN settings interface in the smartphone and select the WiFi network named
“Tuya_XXXX” and connect to this.
• Go back to the “Tuya” APP, the connection will start automatically.
• When “Added 1 device successfully” is displayed, it means the connection is completed
and the device will be listed in the APP list.
Now you can control the purifier via the APP anytime and anywhere (make sure your
smartphone and purifier are both connected to the internet). You can share devices with
friends or family after they are successfully added. It is also possible to change the device
name with a recognizable phrase or word such as “Innoliving purifier”
4. Q&A
Why was not possible to add the purifier?
a. Make sure the purifier is turned on and close to your smartphone during the connection
process between devices.
b. Make sure your smartphone is connected to the WiFi network and that the WiFi router is
working properly.
c. Make sure the purifier is ready for setup. Refer to the product instructions “Add devices
in Easy Mode” or “Add devices in Access Point mode” for details.
d. Make sure that the connected devices have not reached the maximum number of WiFi
routers. If not, disconnect the network of some devices.
e. Make sure the WiFi network password is correct when adding a new purifier.
f. Make sure you haven’t used Chinese characters to name the WiFi network.
Is it possible to manage a purifier with a 2G / 3G / 4G / 5G network?
GB
