OLED SCREEN ORIENTATION:
Hold “+” and “-” bu�on for 3 seconds to flip
the horizontal orienta�on of the OLED screen.
Over-Discharge Protec�on:
The product monitors ba�ery voltage and will
automa�cally power off if the ba�ery is
over-discharged.
Overheat Protec�on:
The CoolFire ULTRA features automa�c real-�me
PCB Chipset temperature detec�on. The screen
will display “TOO HOT” if the PCB is overheated.
Remember last Temperature or Wa�age
se�ng:
When the CoolFire ULTRA is turned off it will
remember the current Temperature or wa�age
se�ng and it will retain the se�ng when the
CoolFire ULTRA is powered back on.
How to charge the CoolFire ULTRA
To charge your CoolFire ULTRA connect your
micro USB charging cable to the charging port
of your device. Connect the other end of the
micro USB charging cable to the USB port of a
computer or a wall charger.
OR
IMPORTANT Charging Informa�on:
Never charge a ba�ery that has been damaged
or dropped.
Never plug a charger into a non-approved mains
power transformer.
Do not overcharge. Remove the ba�ery from the
charger when charging is complete.
Never leave a charging ba�ery una�ended.
Only use the included high quality charging cable.
Wall Adapters should be CE/UL/FCC cer�fied,
high quality and authen�c.
Do not charge your vaporizer with your car.
If traveling by airplane, do not pack your device
into your check in baggage. Speak with your airline
about e-cigare�e/vaporizer transport guidelines.
If there are any issues with the device please
contact your Authorized Innokin vendor
immediately.
2
16
17
