INSTALLATION UNDER
MICR OWAVE
Allow the Stove Alarm to reach room temperature before use.
See the table below for the mounting location and follow instructions 1–4.
Starting the Stove Alarm
Insert the battery (see page 3)
and place the Stove Alarm on the
installation plate. Press the but-
ton shortly. (LED flashes green).
Check installation height
If the distance from stove to Stove Alarm is more than 24" (60cm), the
Stove Alarm's sensitivity level must be adjusted manually.
Please refer to the table underneath together with the information on
page 18, alternatively watch the film on sensitivity configuration.
3
4
5
Watch the movie:
https://vimeo.com/321503955
Setting sensitivity
Watch the movie:
https://vimeo.com/321502592
Sensor installation
DISTANCE FROM COOKER
TO HEAT SENSOR
COOKER SIZE
SENSITIVITY LEVEL CONFIGURATION
0"–24" (0–60cm)
25"–36" (61–90cm)
Sensitivity
Acknowledgement “beep(s)”
Zone 1
Zone 2
Zone 1
Zone 2
31"–32" (76–80cm)
OK
OK
OK
OK
4 presses
29"–30" (71–75cm)
OK
OK
OK
5 presses
27"–28" (65–70cm)
OK
OK
OK
6 presses
25"–26" (61–64cm)
OK
OK
OK
7 presses
24" (60cm) Factory setting
OK
OK
OK
8 presses
22"–23" (55–59cm)
OK
OK
8 presses
18"–21" (45–54cm)
OK
8 presses
OK = The installation complies with the European standard for stove guards
Please note: The sensitivity level of the Heat Sensor is confirmed by the
appropriate sound pattern sequence only and not the LED flashes.
