SATADOM-SH 3SE
15
Rev 1.3 TPS, Jan., 2015
power on pin 7, external power must be provided to the SATADOM from the 2pin connector on the
side.
To have the advantages of SATADOM-SH 3SE series with Pin7 VCC, and to avoid any potential
damage to customers’ board designed with VCC power supply, Innodisk suggests that customers
MUST design their board with a fuse which should be designed before the SATA socket Pin7 VCC.
In other words, customers are suggested NOT TO layout 5V VCC to SATA socket on board directly.
A circuit diagram example to explain this is shown as below.
4.5 Power cable
A power cable is shipped with each SATADOM product, which has standard 4pins power connector
and special 3 pins power connector for SATADOM. The male and female power connector of
SATADOM have foolproof design to avoid misconnection, please check the connector and power
polarity before power on.
