44
1. Disconnect the clearomizer from the battery of your e-cigarette.
2. Turn it so that the mouthpiece points to the floor. Remove the atomi-
zer head base with Airflow Control by turning counterclockwise from
the glass tank of the unit.
3. Remove the old atomizer head by pulling it out and replace it by a
new one. The red o-rings must still be properly seated to prevent
leakage of liquid.
4. Finally, reconnect all parts and make sure no liquid can escape.
Screw the clearomizer back to the battery and give the new vaporizer
head plenty of time to absorb liquid.
Changing the Atomizer Head
Please note the following: Prior to first use, drip a few drops of your e-liquid on the
atomizer head and let it sit before vaping. Please take several puffs without activating the
atomizer and leave the atomizer head sit for 15 minutes in the e-liquid filled tank before use.
Don’t clean atomizer heads with water. Because atomizer coils are wearing parts, they must
be changed regularly.
UWELL Nunchaku – Using the Device
