47
INNOCIGS UNIMAX 2 - USING THE DEVICE
INNOCIGS UNIMAX 2 - USING THE DEVICE
Adjusting the Air Supply
Attaching or changing the mouthpiece
By slightly turning the airflow control ring at the top cap, you can increase or decrease the air supply according
to your personal preferences. The greater the air supply, the lower the drawing resistance. Pay particular
attention to a sufficient air supply during sub-ohm vaping.
When attaching the UNIMAX mouthpiece, make sure that it is in the correct position. You can also use a 510
mouthpiece that is placed on the top cap of the clearomizer. It can be removed by gently pulling up and once
again attached by applying gentle pressure on clearomizer. The mouthpiece can be cleaned with warm water.
Make sure that it is completely dry before reinserting into the clearomizer.
