67
INNOCIGS CUBOID TAP – OPERATING & CHANGING THE VAPING MODES
INNOCIGS CUBOID TAP – ERROR MESSAGES & PROTECTION FUNCTIONS
Over 10 Second Protection
If you press and hold down the Fire button for more than 10 seconds, the device will automatically switch off. The
display will show “OVER 10S PROTECTION.”
Short Circuit Protection
The message “ATOMIZER SHORT” will appear on the display immediately if there is a short circuit at the head.
No Atomizer
“NO ATOMIZER FOUND” will appear on the screen when no atomizer is connected.
New Installation of the Atomizer Head
If a head with a greater resistance than that of the previous one is used, the resistance of the head must
be reset.
When the head is removed, press the Fire button for a few seconds to start the reset. An installation of
a new coil will be detected automatically and the message “New Coil Up” / “Same Coil Down” will be
displayed. Press the “Up” button to confirm a new coil.
If the message appears to be inadvertent (such as when re-using the same coil which is still warm), press
the “Down” button to establish the “basic resistance.”
