24
INNOCIGS CUBOID MINI CLEAROMIZER – USING THE DEVICE
Connecting to the battery
1. Use the enclosed tool to loosen the small screws along the sides of the clearomizer. Do not
completely unscrew.
2. Screw the clearomizer to the Cuboid Mini. Make sure that it sits in the proper position on the
device.
3. Use the small tool to tighten the screws.
Changing the mouthpiece
The mouthpiece is inserted into the top of the clearomizer. Accordingly, it can be removed
by gently pulling up and once again attached by applying gentle pressure on clearomizer. The
mouthpiece may be cleaned with warm water. Make sure the mouthpiece is completely dry before
reinserting into the clearomizer.
