Innocenti UBIND60AL, Instruction Manual

Page: 24 / 28

24
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply
force onto the controls protruding from the hob.
Locating the fixing brackets
• The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
• Fix the hob on the work surface by screw four brackets on the bottom of hob (see
picture) after installation.
• Adjust the bracket position to suit for different work surface’s thickness.
Cautions

The hob must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.

The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.

The hob shall be installed such that better heat radiation can be ensured to enhance
its reliability.

The wall and induced heating zone above the work surface shall withstand heat.

To avoid any damage, the sandwich layer and adhesive must be resistant to heat.

A steam cleaner is not to be used.

This ceramic can be connected only to a supply with system impedance no more
than 0.427 ohm. In case necessary, please consult your supply authority for system
impedance information.