33
5.2.4 NAT
5.2.4.1
Virtual Server
1.
Click ―NAT‖-----―Virtual Server‖ to display the following page. You can add or delete your virtual
server settings here.
By default, the external networks cannot access the IP addresses of your internal network.
However, if you need such access by the external networks, for example, when you want to set
up a server or support some special applications), you should enable this function to allow the
access to your internal network by external networks.
2.
Click ―Add‖ to display the following page.
Select a Service:
Select the service name to be enabled.
Custom Server:
Enter a service name
manually.
Server IP Address:
LAN IP address of the server.
Note
:
After a service is selected, the system automatically opens the corresponding port. After you
manually enter a customized service, you need to manually enter the port to be opened.
3.
Click ―Save/Apply‖ to display the added service, as shown in the following figure.
