54
Example:
Configuration on NAT Router
Destination SubnetMask Gateway Hop Enabled
192.168.1.0 255.255.255.0 192.168.123.216 1
ˇ
192.168.0.0 255.255.255.0 192.168.123.103 1
ˇ
So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above
table to determine that it had to go via 192.168.123.103 (a gateway),
And if it sends Packets to 192.168.1.11 will go via 192.168.123.216
Each rule can be enabled or disabled individually.
After
routing table
setting is configured, click the
save
button.
Summary of Contents for 4000-R2
Page 1: ...1 User s Manual 4000 R2 Wireless N Gigabit Router Issue 1 1 17th August 2011...
Page 13: ...13 Step 1 Set up your system password Step 2 Select Wan Type Auto Detecting or Setup Manually...
Page 37: ...37 2 3 3 Security Settings...
Page 57: ...57 2 3 5 Toolbox 2 3 5 1 View Log You can view System Log by clicking the View Log button...
