Inno3D 3D Printer S1, User Manual

Page: 8 / 23

Inno3D 3D Printer S1 – User Guide Rev 1.0
P/N: 60601 Rev 1.0 Jan 2016
4. Insert the Filament to Extruder and Press “Change Filament” button simultaneously
(Hold the filament tight, and push it towards the Extruder filament inlet, you can feel
that the filament is moving down to the Extruder)
After inserting the filament, you can see the filament is extruded from the nozzle
5. Hold the “Change Filament” button to complete the process, until the “Exit”
message display
Section 7: The First Print
After installing the Inno3D 3D Printer S1 and load the filament, now you can do the first print.
Notice: A test print object is stored inside the 3D Printer. You can test your printer functionality by
printing that test object.
1. In the “Printer Ready” state, just simply press the “Print” button. The test object will be
printed in about 6 ‐ 7 minutes
Hold the “Change
Filament” button until
the “Exit” message
appear
Press the “Print” Button