INNO Cargo Box Installation Instructions Download Page 2

Contact Information

If you have any questions or comments, please contact us at the service center listed below. CarMate shall not be held liable for any accidents or incidental losses arising 
from improper installation or use, nor for those arising from installation or use after the customer has made any change to the system's original configuration or specifications.

10

12

11

Car Mate USA
383 Van Ness Ave., Suite 1603
Torrance, CA
310.533.9881 
www.innoracks.com
[email protected]

9

Insert Key into key cylinder and turn it clockwise to "Open" position. Lift Box Lid by 
pushing release button.

Release button

Box lid

1

2

Key

Leave Key in key cylinder until Box is closed to avoid locking it in the box 
accidentally.

Caution

Strap

Strap Hook

Buckle

Unfasten Buckle and hang Straps on Strap Hooks to keep them out of the way while 
loading. Load cargo. Unhook Straps and fasten it to secure cargo from moving while 
driving.

To close lid, make sure that Key is in the OPEN position. Make sure that Hooks line 
up with latches and close Box all the way.

Hook latches

Hook

Try to lift the lid at the latch points shown below to make sure that the hooks 
have full engaged with the latches. 
The front and rear red stickers will disappear from when lid is properly closed. 
Turn Key counter clockwise to the CLOSE position.

Check at these points

Genuine Inno Replacement Parts

Specifications and the appearance of the carrier system and genuine replacement 
parts are subject to change without prior notice in the interest of product 
improvement.

The following genuine replacement parts are available for this Inno carrier system 
component. Specify the part number when ordering parts from your dealer.

Note

Manual

INNO

ISP952 Strap
 (2 pack)

ISP682 Strap Hook 
  (2 pack)

ISP193 Molding
 (2 pack)

Key(Verify 
Key number)

U-Bolt

Knobs (2 pack)

Plate

Instruction Manual

ISP94 Fit Kit

ISP588 Hole Plugs 
(4 pack)

Reviews: