A
B
C
D
E
F
Made in P.R.C.
A
B
C
D
E
F
Made in P.R.C.
General description of device components
A. Protective cover
B. Micro-Pedi roller
C. Safety switch
D. On/off switch
E. Release switch for Micro-Pedi roller
F. Battery cover (bottom cover on grip)
Read this entire instruction manual care-
fully before using the Micro-Pedi.
Installing the batteries
1. Remove the battery cover (bottom cap
of the handle) by turning it 90 degrees
to the left until it clicks into place (fig.1)
and then pull it down (fig.2).
2. Place 2 AA batteries in the battery com-
partment paying close attention to the
polarity (fig.3) indicated in the interior
of the battery compartment.
3. Place the battery cover back on the de-
vice (fig.4). Lock the cover by turning it
90 degrees to the right until it clicks into
place (fig.5).
How to use
Micro-Pedi was designed to smooth rough
skin on the feet and heels (fig.6).
1. Carefully clean and dry the skin.
2. Once the protective cover has been re-
moved, the device is ready for use.
3. Turn the device on (fig.7) and gently
rotate over the calloused or thickened
skin (moving forwards to backwards or
sideways) for 2-3 seconds at a time.
4. After you have finished the treatment,
rinse the skin clean or use a wet towel
to remove the dead skin cells.
Do not push too hard. Let the device gently
glide over the desired area. The device will
automatically shut off if it is pushed down on
the skin with too much force. Switch off the
device and check whether the area of skin
Instructions for use
EN
