Inno Essentials Silk'n GLIDE AS104486A, User Manual

Page: 59 / 136

59
EN
6.4 Connecting the hair remover
• Insert the device plug
3
of the connecting cable into the connector jack
1 on the hair remover.
• Insert the mains adapter
2
in an easily accessible socket to connect the
hair remover to the power supply.
The lights of all indicator symbols light up consecutively on the indicator on the
operating button
4
and signal that the hair remover is ready for operation.
6.5 Using the hair remover
WARNING! RISK OF INJURY!
• Treat the same area of skin a maximum of one
time per hair removal session!
• End use immediately if blisters start to form or
your skin is burning!
• Read the safety instructions and usage tips before use.
1. Before use, make sure that the relevant area has been shaved, is clean and
dry and free from any antiperspirants and deodorants.
2. Hold down the operating button
4
for 1–2 seconds to switch on the
hair remover.