Inngenso IT101, Manual, Page: 8 / 28

Overview of command elements
Room thermostat
1 – Display
2 – Rotary push button (increase/
decrease value or confirm selection)
3 – Side button: backlight,
thermostat on/off button, step back
Receiver
1 – Receiver ON/OFF Switch
2 – Green light signal
(Receiver turned ON)
3 – Red light signal (Heating request
ON)
4 – Orange light signal
• Blinks slowly in case there is no communication between the thermostat and the
receiver
• Blinks two times in case the receiver receives a message from the
thermostat
• Off in any other case