ibwellness.com
Chair Manual
12
11
5. Finding a location for the chair
6. Moving the massage chair
1. Place the chair in the desired
location and not in direct sunlight.
2. Make sure there is at least 3.5 in
behind and in front of the chair.
1. Press down the back of massage chair
to approximately 45° degree angle.
2. This will allow it to easily be moved to
another location.
CAUTION:
* Do not move massage chair when occupied or
in use.
* Moving the massage chair may cause damage
to floors. Floor protection is recommended.
* Do not drop or suddenly let go of the chair
while moving it.
* Using two people to move the chair is
recommended. The second person should lift up
the legrest, while one person holds the backrest
3.5 in
3.5 in
Chair Installation
Chair Installation
3. Installing the shoulder airbags
Locating pin
Locating pin hole
Cross screw
Cross screwdriver
Press
Press
Lift
Lift
Shoulder position adjustment
Keep this action adjust up or do
wn
Finished
Shoulder airbag tube
(1)
(2)
(3)
(4)
(5)
(6)
a. Unzip the cloth cover for the shoulder airbag components revealing one
locating pin and pin hole for each up and down.
b. Insert up and down two locating pins into the pin holes on the left side of
backrest (as shown). In the screw holes, lock cross screws with the
cross screwdriver.
c. Insert the air tube joints into air tubes. (Note: They must be inserted
completely to prevent air leakage and loss of pressure during use.)
d. Zip up the cloth cover.
e. Repeat steps a-d on the other side of the chair.
f. Adjust the shoulder airbags to fit your shoulder position if needed taking care
not to force them into place.
4. Installing the backrest and headrest
a. Use the velcro strips to connect the backrest and cover.
b. Smooth out the backrest and seat cushion.