5
Powering on and connecting to the VDSL line
You need:
The home gateway unit
The AC power adapter
Ethernet RJ-11 cable
1.
Plug the DC jack of the power adapter to the to the
Power
port on the home gateway, and the other
end to your electricity power outlet.
2.
Plug one end of the ethernet cable to the
WAN
port on your home gateway, and the other end to your
VDSL line.
The
On/Off
button (on the side of the unit) is used to turn the home gateway on or off. The device is turned
on when you press this button and it is pressed in.
When you turn the home gateway on, observe the light indicators. It takes about 30 seconds for the home
gateway to boot up - the
Power
and
DSL
lights are on uninterruptedly.
