INNACOMM W3100V, User Manual

Page: 63 / 133

62
Click Save/apply , the following interface appears.
3.4.4.2 Incoming IP Filtering Setup
Click Security > IP Filtering > Incoming and the following page appears.
By default, all incoming IP traffic from the WAN is blocked when the firewall is
enabled. However, some IP traffic can be accepted by setting up filters.
Click Add , the following page appears. In this page, you can create a filter rule to
identify incoming IP traffic by specifying a new filter name and at least one
condition. All specified conditions in this filter rule must comply with the rule. Click
Save/Apply to save and activate the filter.
You should select at least one WAN interface to apply this rule.