65 / 68
63
Temperature
temperature is too high or too low
Use the INMOTION SCV at the proper temperature. See
page 11 for ideal Operating Temperature Range.
66
67
Large Motor
Electric Current
Overload
Ride the INMOTION SCV following proper operating
instructions and avoid steep or rugged surfaces.
7.2.
The INMOTION SCV Cannot Power On
Recommended Action:
Make sure your INMOTION SCV’s Battery Pack is charged.
Make sure your SmartKey is charged.
Make sure you and your SmartKey are no further than 5m (15 ft) from your INMOTION SCV.
Verify that the SmartKey and your INMOTION SCV are linked.
Check the SmartKey to make sure the INMOTION SCV is not locked.
If the INMOTION SCV can still not power on, remove the Battery Pack and then reinsert it.
7.3.
The INMOTION SCV Cannot Enter Balance Mode
Recommended Action:
Confirm the INMOTION SCV is powered on.
Make sure the Turning Shaft is centered and the Footboard Mat is level.
Confirm there is no weight on the Footboard Mat.
Tap the left side of the Footboard Mat with your foot without stepping on, then tap the right side with your other foot.
If the INMOTION SCV still cannot enter Balance Mode, check to see if there is an error icon on your SmartKey.
If the INMOTION SCV still cannot power on, remove the Battery Pack and then reinsert it.