inM497-1
9
Regulations and Maintenance
FCC compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generation, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
x
Reorient or relocate the receiving antenna.
x
Increase the separation between the equipment and
receiver.
x
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
x
Consult the dealer or an experienced radio/TV technician
for help.
Precautions
点
Read all of these instructions and save them for later use.
点
Follow all warnings and instructions on the product.
点
Product
-
Do not cover or block the vent holes in the case.
-
Do not insert sharp objects or spill liquid into the LED monitor through cabinet
slots. They may cause accident fire, electric shock or failure.
-
Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
-
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage potentials or other risks.
-
Do not touch the screen directly with your fingers. You may damage the screen,
and oil from your skin is difficult to move.
-
Do not apply pressure to the screen. The LED is very delicate.
