BASIC FUNCTIONS MENU
•
Day/Night Setup:
•
Night control:
Auto, selects Night mode in low
light; Color, disables night mode; Mono, forces
night mode, External selects control by the Lamp
Trigger input.
Auto Setup sub-menu - sets the transition points
for Day/Switching when auto is selected.
•
Night Mode:
Defines if burst is present in mono
•
Night Max Gain:
Defines Max AGC gain in mono
•
Fluorescent:
Off, CRR & CRR2 reduce color roll under fluorescent lighting, EFR
overcomes LED lighting “blackout” (CRR2 and EFR apply on DC lenses only)
•
Horizontal Flip:
Mirror the image horizontally
•
Lens & Sync:
Sets the lens type, lens level and adjust sync options.
•
Lens Type:
DC or Manual
•
Video Level:
Adjusts the video signal output level.
•
Sync:
Options are Internal 1, Internal 2, AC-Line
lock.
•
V-Phase:
Set the sync phase (Active only on AC power
source)
•
CCTV System:
Changes the TV Standard. Default is
set according to shipping region
•
Language:
Options are English & Spanish. The defaults are set by the shipping
region.
IMAGE FUNCTIONS MENU
•
Progressive Scan:
Off, image is captured at field rate, successive captures are used
for A and B fields. On, image is captured at 2x field rate and field A and B are gen-
erated from a single capture.
Note
: Camera must be rebooted to change between
scan modes.
•
Backlight:
On, camera is configured to reduce silhouetting effects of strong back-
lighting of a subject. In this mode the camera behaves more like a CCD camera.
•
Digital Zoom:
Default is off. Set to on and Digital Zoom Sub-Menu is available when
joystick is depressed.
•
Zoom:
up to 4x zoom is available
•
Pan & Tilt:
When Zoom >1 it is possible to pan and tilt around the image. 0 indi-
cates the central point of the image.
Note: Enabling zoom will disable Backlight feature.
•
White Balance:
Configures the operational white
balance mode of the camera.
•
ATW (default):
Auto Tracking White Balance -
camera automatically adjusts for correct white
balance.
•
Push AWB:
Use this to fix white balance in
Basic Functions
> Previous Page.
Day/Night Setup..
Fluorescent
Off
Horizontal Flip
Off
Lens & Sync..
CCTV System
PAL..
Language
English
Day / Night Setup
Previous Page.
>
Night Control
DC
Night Mode
B/W + Burst
Night Max Gain
32
Lens & Sync
Previous Page.
>
Lens Type
DC
V-Level
|
---|---
|
Sync
Internal 1
V-Phase
|
---|---
|
Image Functions
> Previous Page.
Progressive Scan
Off
Backlight
On
Digital Zoom
Off
White Balance
ATW..
PUSH AWB Confirm
> Save AWB & All Changes.
Cancel.
*** WARNING ***
All user properties will
be written to flash
difficult lighting conditions, hold a white card in front of the camera, with light falling
on it and press the joystick to fix the white balance.
•
Manual:
Use this to manually fix the white balance. Setting is given in °Kelvin and
the range is adjustable between 2000°K and 11000°K
COMMISSIONING MENU
•
Focus Assist:
when selected, provides an on-screen indication of optimum focus. Use
the Set Focus Region to set the area of interest. Move the area with
.
Press the joystick to return to the focus indicator and adjust for peak reading for opti-
mum focus.
•
Camera ID:
Assign a name to the camera, maximum 8 characters. Press joystick for
character entry.
Selects character. Press joystick to accept and move to next char-
acter.
Escapes back to menu.
•
ID Display:
Sets title display On or Off
• Position:
Selects one of 6 preset positions for camera title. Upper screen left, centre
or right, lower screen, left, centre or right.
•
Privacy Masking:
Off, On, enables up to 12 Privacy masks to obscure areas of the
image. Turning a zone on reveals its configuration
screen. Press the joystick to cycle through the zone
options. A white border indicates movement of the
zone, green increase size & red reduce size. Use
to move/re-size. A long press of the joystick
closes configuration.
•
Mask Color:
Black, White Red, sets the color of any
enabled privacy masks
.
ACTIVITY MENU
•
Alarm:
Enabling activity detection displays an on screen
indication when motion is detected in any of the 4 zones.
•
On:
Enables activity detection. Pressing the joystick
reveals the activity threshold, and adjusts the overall
sensitivity.
•
Setup Alarm Zone:
Set Active Zones enables the
individual active alarm zones. Adjust Zone configures the size & position of each
zone. The same method is used to configure the size and position of the Activity
Zones as Privacy Masking Zones.
Commissioning
> Previous Page.
Focus Assist..
Camera ID..
Privacy Masking
Off
Mask Colour
Black
Enable Masks 1~6
Previous Page.
> Mask 1
On..
Mask 2
Off
Mask 3
Off
Mask 4
Off
Mask 5
Off
Mask 6
Off
Activity Detection
> Previous Page.
Alarm
On..
Setup Alarm Zone..
Alarm Zone Setup
Previous Page.
> Set Active Zones
1 Zone
2 Zones
3 Zones
4 Zones
Adjust Zone 1
Adjust Zone 2
Adjust Zone 3
Adjust Zone 4
SAVE / EXIT MENU
• Save / Reject Settings & Exit:
Reject or Save any changes made to the menus since
the last Save. **Note** Be sure to select Save to ensure any changes made are writ-
ten to the flash memory, other wise the settings will not loaded on the next reboot
of the camera.
• Load Factory Settings:
Restores all menu settings to the factory defaults
•
Reset:
Performs a software reset (reboot) of the camera
•
Menu / Firmware Version:
Shows the firmware versions of the camera.
Image Sensor
⅓” DPS M8800
Signal System
PAL / NTSC
Effective Pixels
758 x 540 pixels
Resolution
690 HTVLe
Minimum Illumination
0.1 Lux (F1.2, 50IRE, 30fps, 2850°K, Colour)
0.001Lux DSS on
S/N Ratio
50dB
White Balance
Auto, 2000°K~11000°K
Dynamic Range
120dB Max, 102dB Typical
Color Roll Reduction
Selectable
Shutter
1
/50 ~
1
/100000 PAL
1
/60 ~
1
/100000 NTSC
Lens
2.8~11m, or 9~22mm F1.4 DC Varifocal
Lens Mount
14mm
Video Output
1.0V p-p, 75Ω
Power Supply
12VDC+15%-10%/24VAC ±10%
Power Consumption
1.7W
Construction
Die Cast Aluminium Shell, Polycarbonate Bubble
Dimensions (mm)
108Ø x 95mmH (4.24”Ø x 3.47”H)
Weight
550g (1.21 lb)
Integrity
IP65
Mounting
Surface
Operating Temp
-10°C~50°C (14°F~122°F)
Operating Humidity
90% non-condensing
Lens
System:
PAL
NTSC
2.8~11mm
SDN
in51S1P1D28V11
in51S1N1D28V11
TDN
in51T1P1D28V11
in51T1N1D28V11
9~22mm
SDN
in51S1P1D9V22
in51S1N1D9V22
TDN
in51T1P1D9V22
in51T1N1D9V22
Support
:
North America:
inMotion CCTV Inc. USA
+1-214-960-4640
Europe:
inMotion CCTV UK Ltd
+44 1782 366080
Save / Exit Menu
> Previous Page.
Save Settings & Exit
Reject Settings & Exit
Load Factory Settings
No.
Reset Camera
Firmware Revision
1.x - x
Menu Version
7.x-7.0x 0
