InMotion AIR Pro, User Manual

Page: 20 / 24

13. Before Your Ride
•
•
•
•
•
•
•
•
Do not touch the battery contacts. Do not dismantle or puncture the outer casing. Avoid contact between metal objects and battery terminals to prevent
short circuits, physical harm or death.
Do not throw the battery into a fire as this could damage it, cause overheating or even a fire.
Do not charge or stop using the battery if it is damaged or flooded.
Do not attempt to remove the battery as you may damage the scooter.
Do not attempt to disassemble the battery to prevent fire hazards. Users are now not allowed to repair spare parts and components come with the
scooter.
Do not ride when the ambient temperature is higher than the operating temperature of scooter (see Specifications) because low/high temperature will
limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.
After each use, fully recharge the battery to extend its service life. Completely draining the battery may permanently damage the battery.
Improper disposal of used batteries seriously pollutes the environment. Follow local regulations regarding battery disposal. Follow battery disposal
regulations to protect the environment.
Typically, a fully charged battery should retain power for 120-180 days. A low-power battery should retain power for 30–60 days. Remember to recharge
it every 60 days to protect it from any damage. Electronics inside the battery record the charge-discharge condition of the battery, damage caused by
over-charging or under-charging will not be covered by the limited warranty.
A well-maintained battery can perform well even after many miles of riding. When used at room temperature 22°C, the battery range and performance is
at its best; whereas using it at low temperatures can decrease range and performance. Battery range will recover when temperature rises.
1. Read the product instructions carefully and do not attempt to ride the scooter if you cannot follow the instructions completely.
2. Please do not allow others to use your scooter without carefully reading this instruction or knowing how to use this product and safety precautions.
3. All parts of the scooter must be properly installed in accordance with the instructions. Improper installation may result in the risk of loss of control,
collision or fall. Before installation or maintenance, please power the scooter off, install the components with proper strength. Too loose or too tight
installation may cause damage or failure of the products.
4. Please purchase insurance in time after purchasing the product to minimize the risk.
5. Before each ride, please check all vehicle components are in place and securely fastened, the performance of wheels, the battery level, running
condition, etc., to ensure any parts including the handlebar, stem, tires, brakes, screw are not loose or damaged, and the vehicle is in good condition for
riding. If you've noticed anything unusual, please stop using immediately and contact after-sales service for technical support.
6. You are obligated to be aware of all laws, regulations and policies of scooter riding in your area and to strictly comply with the applicable laws, regula-
tions and policies.
17