Inmotion controls 140 Series, User Manual

Page: 9 / 20

8
GENERAL OPERATION

Turn on the main power switch of the equipment (Crane).

Install 2 AA batteries in the battery box in the Transmitter.
Make sure the polarity is correct.

Attach Transmitter battery door with screws.

Press the “Start/R0” Button.
Note: LED indicator will flash with red color if proper
procedures are not followed.

Operate Transmitter by pressing each pushbutton.

After operation, perform the following procedures in sequence:
(1)
Press the Stop pushbutton.
(2) Keep the transmitter in a safe place.
(3) Switch main power off to the equipment (Crane).
(4) Remove batteries if not used for a long period of time.
Note: Transmitter has power indicating functions with LED
display.
← “Green Color” – The LED will flash green when battery
power is sufficient.
→ “Red Color” – The LED will flash red when the power is
low.

The operating distance will become shorter and
intermittent when the batteries are low.

Replace with new batteries when battery power
is low.
! DO NOT USE RECHARGEABLE BATTERIES !