Appendix B: BRM Closed Loop Transmit Operation with Power
Splitter
When the BRM without a FEM attached is used with the BAT/BNE or BPLT, to close the transmit
power loop a proportion of the TX output should be fed to the RF detect using the circuit shown in
. Short coaxial cables should be used to connect the parts together.
Figure 49. BRM Closed Loop Transmit Operation with Power Splitter
11.5: Recommended Parts
Part
Manufacturer Part Number
3dB pad Mini-circuits
VAT-3+
Splitter
Mini-circuits
ZFRSC-183-S+
Table 2. Recommended Parts
83:
BGAN Radio Module Terminal Development Kit User Guide
Confidential and Proprietary – Inmarsat Global Limited
