Figure 37. Syslog Destination Configuration
To use this function, take the following steps:
1. Select
Get Syslog Dest
to see if a destination already exists.
2. If you need to set or change the destination, enter the relevant syslog destination IP address and
port number.
3. Select the
Set Syslog Dest
button.
4. Navigate to the
Debug Logging
page and configure syslog filters accordingly.
10.13: Connection
To access this functionality, select
Connection
from the main menu.
The
Connection
page loads up, per
.
67:
BGAN Radio Module Terminal Development Kit User Guide
Confidential and Proprietary – Inmarsat Global Limited
