19
1995-1997 - INLINE, INC
PATHFINDER OPERATION MANUAL - REV2.1A May 19, 1997
FP1
*
Enable the front panel operation (take the unit out of the Stand-by mode and
Executive mode).
[OK]
FP2
*
Executive mode. Disable access to configuration menus from the front panel
(Path Config, RGB delay, RS-232 baud rate, and Command code).
[OK]
INF0
Get the firmware version
[PATHFINDER V2.0a]
INF1
Get the Configuration Number (C/N).
Varies with model #
1
Leading and ending codes not shown for clarity.
*
Global Settings (Save with SAVE0 Command)
S
PECIFICATIONS
RGBS Input:
Connectors
(4) Female BNC
Impedance
75 Ohms
RGB Level
0.7 Vp-p Nominal, 2 Vp-p maximum
Sync Level
5 V maximum
Coupling
DC coupled. Any input signal DC offset should be limited to
±
0.5 VDC to allow for
an acceptable signal swing without distortion.
Audio Input
Connectors
(2) Female RCA
Impedance
620 Ohms
Level
Line Level
RGBS Output:
Connectors
(4) Female BNC
Impedance
75 Ohms
Bandwidth
120 MHz
RGB Gain
1.0
±
5%
Sync Output:
1.0
±
5% Gain into 75 Ohms, 4 V maximum
Audio Output:
Audio Connectors
(2) Female RCA
Audio Impedance
620 Ohms
Gain:
1.0
±
5%
Bandwidth:
50 MHz
General:
Power:
96 - 260 VAC, 40 to 60 Hz
Power Consumption:
35W Max.
Size:
17"W x 11.5"D x 5.25"H
Weight:
20 lbs.