4
IN3216R Operation Manual - V1.1 01/04/01
©2001 - INLINE, Inc.
Parts Included
IN9230 - A/C Power Cord - IEC female to Edison male (U.S. only)
Operation Manual
Optional Accessories
IN9080 - Rack Shelf (for mounting two units in a 1U rack space)
IN9088 - Rack Shelf Blank Plate (for mounting a single unit in a 1U rack space)
IN7200-1 Series - Ultra High-Resolution Single Conductor Video Cables
(available in lengths from 3’ to 250’ pre-terminated with high quality
BNC connectors or as bulk cable).
Troubleshooting
The output device connected to the IN3216R has no image.
Solution 1: Make sure the power supply is plugged in and that the input and output cables are connected
properly.
Solution 2: If the LED on the front of the IN3216R is dark, check the internal fuses (see instructions on
page 3).
Solution 2: Bypass the IN3216R by connecting the input and output cables with a BNC barrel connector
to ensure there is a video signal present.
The output image is too dark.
Solution: Make sure the display device contrast and brightness controls are set properly.
The output image is too bright or the picture blooms.
Solution 1: Make sure the display device contrast and brightness controls are set properly.
Solution 2: The input termination may be set to High Z. Check the termination jumper setting (see page
2).
The output image is not sharp enough. Vertical lines are very thin.
Solution 1: Make sure you are using the appropriate video cable for your signal type. When dealing
with high-resolution video signals, a high quality coaxial cable must be used for long
distance cable runs (50 ft. or more). IN7200-1 series cables are recommended.
The loop output is not working.
Solution: The input termination for input 1 must be set to High Z. Set the internal jumpers as shown
on page 2.
