background image

4

IN2055 / IN2056 OPERATION MANUAL  -  REV. 2.2  02/18/00   

  ©1996-1997  -  INLINE, INC.

Problem:

The output image is too bright or the picture blooms.

Suggestion:

●   

First make sure the display device contrast and brightness controls are set properly.

Then decrease the appropriate IN2055/2056 output gain control until the desired image
is achieved.

Problem:

The output image is not sharp enough.  Vertical lines are very thin.

Suggestions:

●   

Make sure you are using the appropriate video cable for your signal type.  When 

dealing with high resolution video signals, a high quality coaxial cable must be used for 
long distance cable runs (50 ft. or more).

●   

Increase the peaking control of the IN2055/2056 to compensate for high frequency

losses.

WARRANTY

     

Inline warrants the equipment it manufactures to be free from defects in materials and 
workmanship.

     

If equipment fails because of such defects and INLINE is notified within two (2) years from the
date of shipment, INLINE will, at its option, repair or replace the equipment at its plant, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modifications.

     

Equipment that fails under conditions other than those covered will be repaired at the current
price of parts and labor in effect at the time of repair.  Such repairs are warranted for ninety (90)
days from the day of re-shipment to the Buyer.

     

This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantibility or fitness for any particular purpose,
all of which are expressly disclaimed.

The information in this manual has been carefully checked and is believed to be accurate.  However,
Inline, Inc. assumes no responsibility for any inaccuracies that may be contained in this manual.  In no event
will Inline, Inc. be liable for direct, indirect, special, incidental, or consequential damages resulting from any
defect or omission in this manual, even if advised of the possibility of such damages.  The technical information
contained herein regarding IN2055 / IN2056 features and specifications is subject to change without notice.

                                All trademarks and brands are property of their respective companies.
                                                       All Rights Reserved   © Copyright 1996-1997

©

 INLINE, INC.  

  22860 SAVI RANCH PARKWAY  

  YORBA LINDA, CA  92887

 (800) 882-7117    

     (714) 921-4100    

    FAX  (714) 921-4160    

    www.inlineinc.com

Summary of Contents for IN2055






Reviews: