Inline IN1700 Operation Manual Download Page 18

16

© 2000  -  INLINE, INC.                                                                                       IN1700 Operation Manual  -  Preliminary   06/23/00

Problem:    The picture is too bright / overdriven.

Solution:     The input may be unterminated.  If you are not using a local monitor, the input

termination must be set to ON / 75 ohm using the LCD menu (see page 9).

If problems persist, call INLINE Technical Services at (714) 921-4100 for further assistance.

Warranty

 

INLINE warrants the equipment it manufactures to be free from defects in materials and
workmanship.

 

 

If equipment fails because of such defects and INLINE is notified within two (2) years from
the date of shipment, INLINE will, at its option, repair or replace the equipment at its plant,
provided that the equipment has not been subjected to mechanical, electrical, or other abuse
or modifications.

 

 

Equipment that fails under conditions other than those covered will be repaired at the current
price of parts and labor in effect at the time of repair.  Such repairs are warranted for ninety
(90) days from the day of re-shipment to the Buyer.

 

 

This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fitness for any particular
purpose, all of which are expressly disclaimed.

The information in this manual has been carefully checked and is believed to be accurate.  However,
INLINE, Inc. assumes no responsibility for any inaccuracies that may be contained in this manual.  In
no event will INLINE, Inc. be liable for direct, indirect, special, incidental, or consequential damages
resulting from any defect or omission in this manual, even if advised of the possibility of such
damages.  The technical information contained herein regarding IN1700 features and specifications is
subject to change without notice.

INLINE is a registered trademark of INLINE, Inc.  All other trademarks and registered trademarks are
the property of their respective companies.  Inline disclaims proprietary interest in the trademarks of
other.

© Copyright 2000 INLINE, Inc.   All Rights Reserved.

INLINE, Inc.  

  22860 SAVI RANCH PARKWAY  

  YORBA LINDA, CA  92887

 800-882-7117    

     714-921-4100    

    Fax  714-921-4160    

    www.inlineinc.com

Summary of Contents for IN1700



















Reviews: