ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at
, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Insert the
HEIGHT ADJUSTMENT BEAM(10)
into the
EXTENDING TUBE(12).
Lock the
HEIGHT
ADJUSTMENT BEAM(10)
in position by inserting the pin of the
ADJUSTMENT KNOB(11)
into one of the
adjustment holes in the
HEIGHT ADJUSTMENT BEAM(10)
and tightening the
ADJUSTMENT KNOB(11).
STEP 2
Insert the
PAD TUBE(7)
through the hole in the
HEIGHT ADJUSTMENT BEAM(10)
and secure with
BUTTON HEAD BOLT(M8x1.25x22mm)(6).
Slide the
FOAM PADS(2)
on both ends of the
PAD TUBE(7).
STEP 3
Refer to detail view A, push in the
BUTTON PIN(4)
and insert the
ADJUSTABLE INSTEP FRAME(3)
into
the
HEIGHT ADJUSTMENT BEAM(10).
Slide the
FOAM PADS(2)
on both ends of the
ADJUSTABLE
INSTEP FRAME(3).
NOTE:
There are four adjustment holes in the
HEIGHT ADJUSTMENT BEAM(10)
which allow the
ADJUSTABLE INSTEP FRAME(3)
to be attached in four different positions. Find the position which
is most comfortable for holding your ankles while performing the back stretching exercise.
Button Pin(4)
A.
Summary of Contents for 55-1408
Page 14: ...PRODUCT PARTS DRAWING FRONT BACK 14...
Page 17: ...NOTES 17...
