4
3
4
3
1. Installing the Pole and the Desk Clamp Assembly
collar
loosen
tighten
P-A
P-A
2. Attaching to the Desk
2a. Edge Installation
tighten
Note:
min. desktop thickness=10mm
max. desktop thickness=90mm
adjust height
• Determine approximate location for mount keeping in mind display size, height adjustment and pitch/roll
requirements.
• Slip the desk mount assembly over the edge of desk so that clamp fully contacts desk edge.
• Turn the knob to make clamp fit to desk edge, then secure it tightly.
2. Attaching to the Desk
2b. Hole Installation
rubber pad
base plate
attach screw
P-B
pad
adjust screw
Note:
min. hole diameter =10mm
max. hole diameter =70mm
Disassemble the desk clamp assembly and select the right components
for using hole installation.
Re-install the base plate with three retained attach screws, then tighten securely.
Insert the adjust screw into base plate through the hole. Then using the adjust screw to fix and tighten it securely.
tighten
P-A
