Inkel IPP-8213, Operation Manual

Page: 6 / 12

PRE AMPLIFIER
6
IPP-8213
1. TRIM CONTROL
This volume controls gain of incoming signal
and its adjustable range is 44dB.
2. SIGNAL INDICATOR
This LED indicates that signal has been input
properly on related channel.
3. PEAK INDICATOR (INPUT CHANNEL)
This LED indicates that incoming signal has
been overloaded, and it is illuminated before
3dB to be clipping.
4. INPUT LEVEL CONTROL (CHANNEL
FADER)
It controls level of input signal per channel.
Faders of unused channels should be set to
their lowest points.
5. AUX INPUT CONTROL (AUX1, AUX2)
It controls amount of signal which is incoming
through auxiliary input jack.
6. PEAK INDICATOR (OUTPUT SECTION)
If mixed level or master output level per channel
is too high, this LED is illuminated before 3dB to
be clipping.
7. MASTER CONTROL (MASTER FADER)
This is the master control to adjust mixed signal
from each input channel.
8. 3-BAND EQUALIZER (INPUT CHANNEL)
It has been designed as 3-band equalizer to
adjust input signal to much richer sound.
(HIGH: 10kHz, MID: 1kHz, LOW: 100Hz)
9. PRIORITY INPUT CONTROL (PRIORITY 1,
PRIORITY 2)
This controller releases prior input signal than
other input channels.
Priority of this unit.
- First : PRIORITY 1, or PRIORITY 2 INPUT
- Second : CHANNEL 1/2 which ducking
switched on.
- Third : inputs of other channels (CH 3~9), AUX
input.
10. 4-BAND EQUALIZER (MASTER SECTION)
It has been designed as 4-band equalizer to
adjust input signal to much richer sound.
(HIGH : 10kHz, MID-HI : 2kHz, MID-LOW :
400Hz, LOW : 80Hz)
11. SUB OUT 1, 2 CONTROL
This is sub output control to adjust mixed signal
from each input channel.
12. POWER SWITCH
If press this switch, then power is supplied and
LED is illuminated.
13. PHANTOM POWER INDICATOR
This LED indicates phantom supply statue (DC
+18V) for condenser MIC.
Front Panel