INKCUPS PAD PRINTERS
ICN-B100
¤
All rights reserved by Inkcups Now Corporation Page 15
V:91719
Printing
plate
TUNE UP THE INK CUP
After installing ink cup & etched plate on the base plate, you should tune up the ink cup so
that it is on the centre top of the base plate. If the ink cup is installed outside of the steel plate,
ink will be leaked out.
The following diagrams are indicating the correct position of ink cup and plate:
CORRECT (Fig.1) INCORRECT (Fig.2)
To position the ink cup in x-axis, loosen the red locking handle and then move the ink cup
positioning block leftward or rightward. Lock back the locking handle afterward.
Ink is leaking if the ink
cup is out of the plate.
Ink
cup
Loosen this first
Then, adjust
this left/right
