Step 2.
Attach bottom frame with mirror (P3) to legs (P2) as shown below. Securely tighten all bolts (H1) with
Allen wrench (H3).
Step 3.
1) Turn the assembled table to an upright position.
2) Gently lay the top glass (P4) on the assembled table top frame (P1) as shown below.
3)
Leveler adjustment:
Leveler are installed on the legs and adjust as needed to make sure the table is
level. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
(H1)x4
(H2)x4
