ITC-306T User Manual
Inkbird Tech. Co., Ltd.
www.ink-bird.com
6
4. Key Operation Instruction
4.1 How to set parameters
When the controller is working normally, press “SET” key for over 3 seconds to enter
parameters set up mode. “SET” indicator lamp will on. PV window displays the first menu
code “TS1”, while SV window displays according setting value. Press “SET” key to go to
next menu and display according menu code, press
“
” key or “
” key to set current
parameter value. After setting done, press
“
SET” key for 3 seconds at any time to save
the parameters change and return to normal temperature display mode. During setting, if
there is no operation for 10 seconds, the system will quit setting mode and return to
normal temperature display mode without saving the parameters change.
