Part number SP1230
2013-
2020
Subaru BRZ
2013-
201
6 Scion FR-S
2017
-2020
Toyota 86
2.0L 4cyl
1- 1 intake system
1-
3.5”
Web nanofiber Dry filter
(#1021)
(#11086)
1- Heat Shield
(#11087)
(#3044)
1-
3” straight hose
2-
#
048
Clamps
(#4004)
5- M6 button head screws
(#6083)
(#6047)
2-
M4 button head screw
s
3-
M6x16
mm
Hex screw
s
(#6005)
1-
M6 flange nut
(#6002)
3-
F
ender washers
(#6010)
1-
1.5” vinyl plug
(#8040)
1- Rubber Trim @13.5"L (#6023)
Note: All parts and accessories now
sold on-line at :
“injenonline.com”
Note: The C.A.R.B Exempt sticker must
be attached under the hood in a man-
ner such that it is easily viewed by an
emissions inspector.
CARB E.O. 2013-2014 models only
Congratulations! You have just purchased the best engineered,
dyno-proven cold air intake system available.
Please check the contents of this box immediately.
Report any defective or missing parts to the Authorized Injen
Technology dealer you purchased this product from.
Before installing any parts of this system, please read the instructions
thoroughly. If you have any questions regarding installation please
contact the dealer you purchased this product from.
Installation DOES require some mechanical skills. A qualified
mechanic is always recommended.
*Do not attempt to install the intake system while the engine is hot.
The installation may require removal of radiator fluid line that may be
hot.
Injen Technology offers a limited lifetime warranty to the original
purchaser against defects in materials and workmanship. Warranty
claims must be handled through the dealer from which the item was
purchased.
Injen Technology 244 Pioneer Place Pomona, CA 91768 USA
Please check the contents of this box immediately.
Note: This intake system was Dyno-tested with an Injen filter and
Injen parts. The use of any other filter or part will void the
warranty and CARB exemption number.
Parts and accessories are available on line at “Injenonline.com
Figure 2
Figure 1
NOTE: DISCONNECT BATTERY BEFORE
INSTALLATION! THIS WILL RESET AND
START FUEL-TRIMS AT ZERO!
Cyborg Intake System
“The World’s First Tuned air Intake System!”
Factory safe air/fuel ratio’s for Optimum performance
Injens tuning process covered by three U.S. Patents
Note: Injen strongly recommends that this system be installed by a
professional mechanic.
Warning: Manufactures attempting to duplicate Injen’s
patented process will now face legal action.
MR Technology Step down process:
1- Calibration Method for Air Intake Tracts for Internal Combustion Engines.
Covered under Patent# 7,359,795
2- Calibration Device for Air Intake Tracts for Internal Combustion Engines.
Published and patent pending
3- Calibration Method and Device for Air Intake Tracts having Air Fusion Inserts
Published and patent pending
1- Heat Shield Cover
