INIS Stoves InisBofin User And Installation Manual Download Page 2

Page: 2 / 22

Dear Buyer!

Thank You for purchasing our company’s article and for the confidence in
products of

“JSC Biokaitra”.

We wish you success in use of it!

“JSC BIOKAITRA”

The insert

“InisBofin Roomheater ” is designed for heating residential and public areas.

This stove contains a modern construction and ensures long term usage while using it
properly. The

insert “InisBofin Roomheater” conforms to LST EN 13229 standard

requirements.

Insert “InisBofin Roomheater” conforms to environment, economic and

manufacturing requirements.

NOTICE! Before installation and operation of the Insert Bofin Room heater,
please read this manual. This will help you to properly install and the most
effectively use the product purchased and to avoid accidents.

When buying Insert Room heater, please read terms of warranty, make sure
Certificate of acceptance is filled in completely and correctly

Summary of Contents for InisBofin























Search results

Summary of Contents for InisBofin

Reviews:

Related manuals for InisBofin

Brands by name

Popular brands

INIS Stoves InisBofin, User And Installation Manual

Search results

Summary of Contents for InisBofin

Reviews:

Related manuals for InisBofin

Brands by name

Popular brands