INHECO
08
Doc ID: 900678-001
July 2020
2.4.
Labels
The identification label with part number and serial number also contains important
technical indications. The electrical specification on the label must meet your local
situation. The label is placed on the top of the Heated Lid. The identification label must
not be removed. If it has become illegible or falls off, it has to be replaced by a new
identification label. New labels can be ordered at INHECO. In case the label is missing
and you do not know the part number and serial number, they can also be read out with
the software (MTC/STC Demo Tool) which can be downloaded from INHECO´ login
section on
. → Trouble Shooting and Support, page 15f.
Fig.2:
1000
INHECO GmbH
82152 Martinsried / Germany
03
PN:
SN:
Input: 24V
Imax: 4,8A
8900033-A
Heated Lid
2016-09
Rev.:
Product labels on the device
Fig.3:
INHECO GmbH
82152 Martinsried / Germany
1000
03
PN:
SN:
8900033-A
Heated Lid
2016-09
Rev.:
Storage and transportation conditions:
-10°C to +60°C [+14.0°F to +140°F],
10% to 80% RH, non condensing
Shipment labels on the package
Fig.4: Label on instrument
Caution Hot