Important:
Please read these instructions carefully and
keep them in a safe place for future reference.
Caution:
Leave the lamp unplugged while setting it up.
Set-up and adjustment
Stand the lamp upright and inser t the plug in the mains
socket. The on-off switch is at the side of the base.
The flexibility of the 100 cm-long silicone lamp body allows
for a wide range of adjustment options. Knots, loops and
other adjustment variants can be used to give
Zufall T
a completely new appearance.
1
However, extreme horizontal positions are not possible:
The silicone body requires a degree of stability to prevent
it from collapsing under its own weight. The reflector can
be turned and tilted in any direction.
Changing the light bulb
Important:
In the event of damage to the LED bulb,
replacements may only be fitted by Ingo Maurer GmbH.
The bulb has an average life of 40 000 hours (information
supplied by manufacturer).
Cleaning
Use a damp cloth with a few drops of washing-up liquid.
Do not use cleaners containing solvents.
Technical specifications
230 V~50 Hz; 125 V~60 Hz.
The correct voltage and fre-
quency for your lamp are indicated on the type label.
The wide-range input power supply provides for auto-
matic switching between 230 and 125 V.
Sec. 10 V, LED 5 W, Class 2.
Any repairs that become necessary must be performed by
a qualified electrician. If the external power lead becomes
damaged, it may only be replaced by Ingo Maurer GmbH.
English
7
6
English
LED radiation: do not look directly into the beam!
LED Class 2, = 450 nm, P
≤
1 mW
Summary of Contents for Zufall T
Page 1: ...Zufall T Instructions...