English
Please be aware that the aluminium honeycomb (
3
) may
have sharp edges.
2
Switch the lamp on with the foot switch on the power
lead.
Changing the light bulb
Important: Use only bulbs of the following type with
125 V current: Standard A-19 light bulb 150 W, clear,
E27 base.
Caution:
Unplug the lamp and allow the aluminium
honeycomb and the bulb to cool down completely! Do
not touch the bulb with your bare hands (risk of finger-
mark damage)!
Remove the spent bulb by carefully grasping it from above
and screwing it out of the socket, and fit the replacement.
Please be aware that the aluminium honeycomb (
3
) may
have sharp edges.
2
Cleaning
To prevent corrosion, the browned base plate should be
wiped lightly with the oil-impregnated cloth supplied.
Please follow the manufacturer's instructions.
Technical specification
230 V:
max. 150 W, clear, E27 base.
125 V:
Standard A-19 light bulb max. 150 W, clear, E27
base.
Any repairs that may become necessary must be carried
out by a professional electrician. In the event of damage
to the external power lead, replacements may only be
fitted by Ingo Maurer GmbH.
6
English
Caution:
Leave the lamp unplugged while assembling it.
Do not connect it to the power supply before completing
the assembly and inser ting the light bulb.
aR-ingo is a hand-made product: variations in the honey-
comb structure are possible.
Accessories
1 Allen key
1 light bulb
1 oil-impregnated cleaning cloth
Assembly
Lay the lamp flat on the floor or on a table, with some
form of cushioning to prevent damage to the surface.
With the Allen key supplied, undo and remove the retai-
ning screw (
1
) at the foot of the lamp. Align the base
plate (
2
) with the drill hole at the foot of the lamp so
that the longer par t of the base plate faces downwards
and the aluminium honeycomb (
3
) upwards.
1
Take care that the power lead does not become trapped
between the foot of the lamp and the base plate. Thread
the retaining screw (
1
) through the drill-hole in the base
plate, push it into the foot of the lamp until it reaches the
stop, and tighten it with the Allen key.
1
Stand the lamp upright on the base plate. The aluminium
should now face to the rear and the longer par t of the
base plate to the front.
2
Inserting the light bulb
Important:
Do not touch the bulb with your bare hands
(risk of fingermark damage)!
Carefully grasp the bulb and screw it down into the socket.
4
4
7
4
4
4
4
4
4
4
4
4
4
Summary of Contents for Ar-Ingo
Page 1: ...aR ingo Instructions...
Page 7: ...13 2 1 12 3 2 1 3...
