INGICS
TECHNOLOGY
The scan result list will be displayed on the popup window, and the user can choose the
correct AP from the list.
SSID: No manual input required. It is automatically filled once a user chooses an AP from
the scan result list.
Security: Basically it is automatically detected and selected after choosing an AP from the
scan list. But in case the AP setting is in WEP open or WEP shared, the user has to
confirm it by himself/herself.
Password: Type the one assigned in your AP.
*Note: In data transfer, by default, WiFi has higher priority than LTE. So for iGS03M if both
interfaces are configured correctly and connected, the data will be transferred by WiFi.
Users can change the priority through the Telnet command.
Network
WiFi Address (Device Address for IGS03E)
This setting is for configuring in WiFi
Station mode or IGS03E. Normally the
“DHCP Client” is used to obtain an IP
Address from WiFi AP (or DHCP server
for ethernet). If one wants to manually
assign an IP address for iGS03, choose
“Static IP” to to assign the IP Address,
Netmask, Gateway, and/or DNS
servers.
DHCP Server (WiFi AP)
The default IP address of iGS03 in WiFi AP mode is 192.168.10.1 and the netmask is
255.255.255.0. In case the user wants to change the IP address in AP mode, just set the
IP and Netmask here. The
corresponding DHCP client address
will be changed too. For example, if
the DHCP server IP address is
changed to 192.168.0.1., the DHCP
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
11