INGICS
TECHNOLOGY
MQTT Client
MQTT server is supported by the iGS01S. In this scenario, one has to assign the MQTT
host address and port number. Also the publish topic needs to be assigned. Client ID is
defaultly assigned as the gateway name with part of the MAC address, users can change
it as well. If the Client ID is not set, the system will generate a random number for it.
Username and password are optional.
MQTTS
Users can enable MQTTS support. Users can also enable RootCA/Use Certificate based
on the server requirement. For example, to enable AWS-IOT, the user has to enable
MQTTS/ROOT CA/ Use Certificate options and upload certificate and private key in the
advanced page.
Request Interval and Throttle Control, please refer to HTTP client.
Advanced
There are several features in this page that can help users to deal with the incoming BLE packet.
BLE Filter
Users can set BLE filters to filter out the
unwanted BLE information. There are two
kinds of filters. One is by BLE RSSI value
and the other is by pattern/mask
combination.
RSSI
If the bar is pulled right to -50dBm, only
the BLE tag/beacon with RSSI larger than
or equal to -50dBm(say -45dBm) will be
sent out to the server.
Payload Whitelist
Two sets of payload masks are provided
for filtering the unwanted beacon. Set
pattern/mask fields to configure the whitelist.
If payload & mask != pattern & mask, the entry will be filtered out.
Some examples are provided in AP007_iGS01_payload_filter.
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
8
