AAY2000IKI06
14
Installation manual
Ingeteam Power Technology, S.A.
3. Operating, conservation and transport conditions
Failure to comply with the instructions provided in this section could cause damage to the equipment.
Ingeteam assumes no liability whatsoever for damages derived from non-compliance with these
instructions.
3.1. Receipt of the equipment
Receipt
On receipt, please check the terms indicated in the Delivery Note, sign the box: “Firma Receptor Mercancía” (signa-
ture of the recipient of the goods) and return the signed copy to the sender’s address.
Do not unpack the equipment until it is ready to be installed. It should remain in a horizontal position at all times.
INGETEAM POWER
TECHNOLOGY, S.A.
Avda. Ciudad de la Innovación 13
31621 Sarriguren (Navarra) SPAIN
www.ingeteam.com
INGECON
®
μ
WINd INTERfACE
Modelo
Ingecon
®
μWind Interface
Cod. I+d
AAY7500
S/N
100010060001
IP65
2011
Ingecon
®
μWind Interface label
The packaging dimensions are as follows:
Type of packaging
Weight (Kg)
Length x Depth x Height (mm)
Cardboard box with foam
7
400 X 400 X 240
Unpacking the equipment
The equipment is clearly identified by its own, unique serial number. This number should be referred to in all commu-
nications with Ingeteam. It is indicated as S/N on the nameplate, as shown below.
