7
6
When properly adjusted, secure
strike with additional screw.
IMPORTANT!
Perform operational check.
B. With door closed, push device pushbar.
Device should allow door to open.
A. With door closed, push against
door without touching device.
Device should NOT allow door to open.
C. If device does not function as described,
adjust strike position and continue
operational check until device functions
as described above.
Strike plate
4
Install new strike using existing
strike holes.
909 Strike
Strike Body
(against door)
5
Verify gap between latch bolt and
strike and adjust strike as needed.
Strike MUST have some gap
Gap
(no more than 3/16”)
IMPORTANT!
911007-00(A) Copyright © 2009 Ingersoll-Rand Company Limited
