XP98/99 Series Center Case Replacement Kit Less Cover
Installation Instructions
VON DUPRIN
®
Continue with step 4 on other side of sheet
911007-00
Slide mechanism case back 6”.
Replace center case.
A. Remove two center case mounting screws.
B. Remove retaining ring and pin.
C. Remove old XP98/99 center case.
D. Attach new center case with new pin,
retaining ring and screws.
Trim
Remove exit device from door.
Two new
mounting screws
New retaining ring
and pin
New XP
center case
Pin must go in front
hole as shown
Remove two screws
and bracket
Slide mechanism
case back 6”
PARTS INCLUDED IN KIT
#8-18 x 3/8” Center Case Cover Screws (Bronze)
#8-18 x 3/8” Center Case Cover Screws (Stainless)
#8-18 x 3/8” Center Case Cover Screws (Brass)
#8-18 x 3/8” Center Case Cover Screws (Dark Bronze)
Retaining Ring
Control Link Pin
Center case assembly
#8-32 x 3/8” Mounting Screws
909 Strike Kit
A
B
C
E
D
Item # QTY Description
4
A
4
4
4
B
1
C
1
D
1
E
2
F
1
Exit device
New retaining ring and pin must be
installed securely. If pin comes out,
door will not open properly.
WARNING
!
CAUTION
!
This is a center case replacement kit for existing XP98/99 devices only. A different kit is required for retrofitting an XP98/99 center case
onto a standard 98/99 Rim device. That kit includes the XP98/99 center case plus additional required parts which this kit does not have.
F
1
2
3
