Ingersoll-Rand Thermo King Precedent C-600M, Operator'S Manual

Page: 61 / 152

TK 56171-2-OP-EN 61
Cycle Sentry or Continuous Mode is selected by pressing the Cycle Sentry/
Continuous Key (
Figure 56, p. 61 ). The unit is currently operating in
Continuous Mode as shown by the absence of the Cycle Sentry Icon.
Figure 56. Cycle Sentry/Continuous Key
If the unit is operating in Continuous Mode, pressing the Cycle Sentry/
Continuous Key changes the mode from Continuous Mode to Cycle Sentry
Mode. The display confirms the change, as shown (
Figure 57, p. 61 ).
Figure 57. Mode Change Confirmed
The new mode is confirmed for two seconds ( Figure 58, p. 62 ).
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss